Genesis 2200MTE
- Code:
- Price: Contact Us
- Description
- Technical data
- Highlights
- Accessories
- Documents
- MIG/MAG Pulsed - MMA - TIG DC HF Start
- Single-phase 1x230V
- EasyArc is standard
- Built-in wire feeder unit
- iPanel LCD control panel
- Customers like it because:
-
230V supply single-phase
TIG, MIG/MAG and MMA
all-in-one300mm wire spool
- Light job shop fabrication
- Building sites
- Shipyards
- Plants machinery construction
- Automobile industry
- Railway industry
- Food industry
- Chemical industry
- Repair and overhaul
- Workshops
- Sheet metal working
If you like over A. Please contact us
General |
|
Welding processes | MIG/MAG - PULSED MIG/MAG - MMA - TIG DC HF - TIG DC Lift |
Materials | Carbon steels - Stainless Steels - Aluminum - Copper |
Dimensions | 620x270x460mm |
Weight | 23.7kg |
Power supply |
|
Voltage (50/60 Hz) | 1x230V±15% |
Maximum input power | 6.4 kVA |
Maximum input current | 28.2A |
Power factor PF | 0.99 |
Efficiency | 86% |
Slow blow line fuse | 25A |
Open circuit voltage | 92Vdc |
IP protection rate | IP23S |
Insulation class | H |
Power supply cable | 3x2.5mm2 - 2m |
Welding |
|
Adjustment range | 3A-220A |
Duty cycle MIG/MAG - 40 °C |
35% - 220A 60% - 190A 100% - 180A |
Duty cycle
MIG/MAG - 25 °C
|
100% - 220A
|
Ø Wire diameter | 0.8 -1.0 mm (opz 0.6-1.2) |
Ø Fluxcoredwire | 1.2 -1.6 mm |
Ø Aluminumwire | 0.8 -1.2 mm |
Wire speed | 0.5 - 22 m/min |
N° rolls | 2 (4 opz) |
Wire spool diameter | Ø 200/300mm |
Synergic program | 60 |
Welding program memory location | 64 |
U/D TIG Torch compatible | |
Digital TIG Torch compatible | |
U/D MIG/MAG torch compatible | |
PUSH PULL torch compatible | |
Remote Control compatible | |
Standard EasyArc |
- "Green@wave" inverter technology for high energy efficiency and perfect control over all welding phases
- Heavy duty and enviromental conditions, high service life
- Selco CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
- Software based controls can be upgraded as new features become available
- Reduced dimensions and compact construction
- High temperature, shockproof, abrasion resistant plastic case
- Air flow ducting and fully encapsulated PC board to avoid dust contamination
- Linear controlled fan on demand
- Energy-saving inverter technology (built-in P.F.C. - power factor controller)
- Built-in wire feeder unit (2/4 rolls drive)
- Fully Selco designed wire drive unit
- Ø 200/300 mm wire spool compatible
- Welding polarity switch device
- Full digital and user-friendly LCD graphic display control panel
- Welding parameters digital display
- Last job settings auto-storage at switch-off
- User-defined welding program storage capability (64 free memory locations)
- Totally programmable user interface
- Programmable welding operations safety limits
- Lock-unlock function key protected by password
- Ideal for stick welding with multiple types of popular electrodes
- Built-in adjustable arc control features (hot start, arc force, antisticking)
- Synergic setting for optimal stick welding with all types of electrodes
- Precise arc striking and high stability arc
- 2/4 step operating mode
- Arc dynamic adjustment
- Perfect arc ignition (soft start - motor slope)
- Burn-back and droplet detachment correction
- Crater filler operating mode
- Synergic operations from databank (60 pre-set programs)
- Wire speed (0,5-22,0 m/min), amperage and piece thickness adjustment
- Spot welding mode
- Intermittent welding mode
- MIG/MAG bilevel
- Selco Up/Down torch compatible (welding current adjustment)
- Digital TIG torch compatible
- Smart slope control
- Euro adaptor - U/D MIG/MAG torch compatible
- Digital MIG/MAG torch compatible
- Push-pull torch device
- Remote control compatible
- Selco WU cooling unit compatible
- Controlled cooling operations